Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Aldine
Storm damage, cracked crowns, and rusted caps are the reasons most Aldine homeowners call us, and we get to them with the tools and materials to actually fix the problem in one visit. If you’ve seen a water stain on the ceiling near the chimney or noticed loose flashing after a hard rain, that’s the work we do. Our technicians have up to 12 years of experience reading what Gulf Coast weather does to masonry and metal, and they know Aldine’s housing stock well.

We serve homeowners across Aldine and the surrounding neighborhoods, and when you call us at (844) 320-3258 you reach a team that can inspect, diagnose, and repair without sending you to a second company. The estimate is free, and the price you’re quoted is the price you pay.
Why Aldine Homeowners Call Highpoint Chimney Sweep for Chimney Repair
Most of the chimney work in Aldine isn’t about creosote. It’s about water and pests getting into fireplaces that sit unused for months in Houston humidity. We understand that about this community, and it shapes how we approach every job here. Instead of sweeping heavy soot from a working hearth, we’re often inspecting a dormant masonry firebox, checking whether the flue is even usable, and tracing where moisture has been getting in.
When a storm rolls through and you notice a stain spreading on the ceiling below the chimney, you need someone who can tell the difference between a flashing failure and a roof problem. That’s the kind of diagnostic work we do routinely in Aldine. We’ve built a reputation here on honest assessments and trade-grade repairs, not quick patches that fail by the next rainy season. If your chimney doesn’t need work yet, we’ll tell you that plainly.
Call (844) 320-3258 and we answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, means we can get to Aldine promptly. The estimate is free and there are no trip charges.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Liner Installation in Aldine
Chimney liner installation in Aldine is most often needed when the original clay-tile flue liner has cracked or spalled after decades of Gulf Coast moisture, and the fireplace can’t be safely used until it’s relined. Many of these single-story ranch homes in 77060 were built with clay-tile liners that have weathered forty or more years of humid summers and storm-driven rain. A cracked liner lets heat and gases reach the surrounding masonry, and it can let water into the flue structure. When a liner fails, we install a stainless system using DuraFlex, which gives you a durable, code-compatible flue that will hold up to the local climate. We also use HeatShield ceramic resurfacing when the liner can be restored rather than fully replaced, which is a repair option most sweep-only services can’t offer.
When a Liner Needs Replacing
If a Level 2 inspection shows cracked tiles, gaps at the joints, or a flue that’s too small for the appliance connected to it, relining is usually the right call. We document what we find with photos so you can see the condition of the liner yourself before any work begins. If the liner is sound, we’ll tell you and move on to whatever else needs attention.
Restoration Instead of Replacement
For liners with surface damage but intact structure, HeatShield resurfacing can restore the flue without the cost and disruption of a full reline. It’s a pro-tier repair that many basic sweep services simply can’t perform. We’ll explain which option fits your chimney based on what the inspection actually shows.
Chimney Flashing Repair in Aldine
Chimney flashing repair in Aldine is the fix most often needed when water stains appear on a ceiling or in the attic near the chimney after heavy spring or fall rain, because the flashing at the roof-chimney joint is where wind-driven water finds its way in. Flashing is the metal that seals the gap between the chimney and the roof, and when it’s loose, rusted, or was installed with the wrong materials, water gets behind it and travels down into the framing. Homeowners often mistake this for a roof leak. We check the flashing, the counter-flashing set into the masonry, and the sealant at the joints to find the actual entry point. Proper flashing repair stops the leak at its source rather than patching over the symptom.
Signs of a Flashing Failure
Ceiling stains below the chimney, dampness in the attic near the flue, or water running down the outside of the chimney are the classic signs. If the flashing has pulled away from the masonry or the roof surface, it needs to be reset or replaced. Caulk alone won’t hold through a Houston rainy season.

Why It Gets Misdiagnosed
Water that enters at the flashing doesn’t always show up right at the chimney. It follows the framing and appears somewhere else on the ceiling, which is why roofers and homeowners alike often blame the shingles. A chimney inspection is the only way to rule out the flashing as the source.
Trusted Brands We Service in Aldine
We draw from an industry-recognized professional supply chain so that repairs use purpose-engineered components rather than hardware-store substitutes. For relining work we install DuraFlex stainless systems. For liner restoration we use HeatShield ceramic resurfacing. For caps and weatherproofing we work with Gelco and other professional-tier brands. These are the same materials contractors and chimney industry professionals rely on, and we name what we install because accountability matters when the work is structural. We don’t claim to stock parts on a truck, but we source the right components for each job and can move quickly on the turnaround so your chimney doesn’t sit half-repaired waiting on a special order.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Aldine Homes
- Cracked crowns and rusted caps. Heavy spring rains and hurricane-season wind pound the top of exterior chimneys on these single-story brick ranches. A cracked crown lets water soak into the masonry, and a rusted cap lets it pour straight into the flue.
- Failed flashing at the roof-chimney joint. When wind-driven rain gets behind loose or rusted flashing, it shows up as a ceiling stain or attic dampness. It’s one of the most common sources of water damage we trace in Aldine, and it’s frequently mistaken for a roof problem.
- Displaced or missing cap screens. Long warm-season dormancy gives birds and wasps plenty of time to nest in an open flue. A blocked flue kills draft and creates a real fire hazard when the fireplace is finally lit.
- Spalling brick and deteriorating mortar. Decades of humidity and rain take a toll on exterior masonry, and cracked mortar joints let in more water. Repointing and waterproofing catch the damage before it reaches the structural brick.
Pricing for Chimney Repair in Aldine, TX
Chimney repair pricing in Aldine depends on what the inspection actually finds, but here are the ranges we work from. Chimney flashing repair typically runs $250 to $600 depending on roof pitch and the extent of the rebuild. A chimney crown rebuild usually falls between $400 and $900. Mortar repointing and tuckpointing runs roughly $350 to $850 based on the square footage of masonry involved. Chimney waterproofing on an exterior chimney is generally $300 to $650. Liner installation using DuraFlex is a larger investment, typically $1,800 to $4,500 depending on flue height and liner diameter, while HeatShield resurfacing runs less than a full reline. These are estimates for planning; the written estimate from your inspection sets the final price. Everything is priced per job by that estimate, and the estimate itself is free.
We Also Serve Cities Near Aldine
Our chimney repair team works throughout the northeast Houston area, so if you’re just outside Aldine we can still help. We regularly serve homeowners in Jersey Village, Humble, Atascocita, and Porter Heights, and the storm exposure and housing stock in these communities present many of the same repair challenges. Call (844) 320-3258 to schedule an inspection.
Serving Aldine, TX – Our Local Coverage Area
We serve Aldine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Aldine
Yes, especially if you haven’t used it in years. A dormant fireplace in Aldine’s humid climate is exactly where nests, mold, rust, and water intrusion do their quiet damage, and you need proof the flue is even usable before you light a fire. An inspection verifies the liner, cap, and crown so you know what you’re working with. Call (844) 320-3258 for a free estimate.
A ceiling stain near the chimney after a storm usually points to failed flashing at the roof-chimney joint or a cracked crown letting water into the flue. It’s often misdiagnosed as a roof leak because the water travels along the framing. We trace the actual entry point with an inspection. Call (844) 320-3258 to book one.
Yes. A loose or rusted cap lets rain straight into the flue, but it also lets birds and wasps nest inside and can obstruct draft when it’s displaced. In Aldine’s warm-season dormancy, that’s a real hazard by the time you try the first fire of the season. Call (844) 320-3258 for a replacement quote.
You usually can’t tell from the ground; the signs show up in a Level 2 camera inspection, which looks for cracked tiles, spalled surfaces, and gaps at the joints. Visible water damage or a draft that feels weak can hint at a problem, but the inspection confirms it. Call (844) 320-3258 to schedule one.
First-degree creosote is a light, flaky soot that’s easy to brush away. Third-degree creosote is a hard, glazed layer that fuels chimney fires and requires professional removal, often with a chemical treatment. In Aldine’s rarely-used fireplaces, creosote is less often the problem than water and pests, but it matters when it’s present. Call (844) 320-3258 for an assessment.
If you’ve seen a stain, a rusted cap, or just want to know whether your chimney is ready for the season, give us a call at (844) 320-3258 for a free estimate. We’ll inspect it honestly, show you what we find, and only recommend the work your chimney actually needs.
Written by the team at Highpoint Chimney Sweep.