Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Montgomery
A chimney sweep in Montgomery usually costs $150 – $275 for a single flue, and we handle cleaning, inspection, and any needed repair on the same visit. We work throughout Montgomery and know its two very different chimney markets well: the new custom homes clustered around Woodforest and Bonterra in 77316, and the older ranch and farmhouse properties out in 77356. That matters because the two need different care. Local experience isn’t a slogan here; it’s knowing which houses have factory-built inserts and which have clay-tile flues that have never been relined. Call (844) 320-3258. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Montgomery Homeowners Call Highpoint Chimney Sweep for Chimney Sweep
We’ve built a steady following among Montgomery homeowners because we show our work rather than describing it. On a property with several fireplaces or appliances, our technicians inspect each one separately and photograph what they find, so you’re looking at the same evidence we are. Our technicians have up to 12 years of experience, and many have spent their careers on both the newer subdivisions and the older rural properties that make up this town.
Montgomery customers tend to call us back because a single company handles the sweep, the inspection, and the repair. There’s no handoff to a second vendor when something turns up. When a flue needs relining, we bring HeatShield ceramic resurfacing or a DuraFlex stainless system rather than referring you elsewhere. Response time to Montgomery is quick because we route appointments by distance, not by queue position. Local knowledge is the other piece: we recognize the telltale signs of a pine-cone-and-nest blockage the moment we look up a flue in this tree canopy.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Services in Montgomery
Chimney Services in Montgomery begin with a real assessment of what your property actually has, because a house with one wood fireplace and a gas insert in the den isn’t one job. We sweep first- and second-degree creosote from the flue, clear the firebox of ash and soot, and check the damper, smoke shelf, and cap. A single-flue annual sweep in Montgomery typically runs $150 – $275, and a multi-appliance property with three fireplaces is usually $350 – $550 once each flue is treated individually. If the inspection turns up a failure, we quote the repair on the same visit and can usually complete it that day.
Multi-Flue Sweeping
On a Montgomery property with more than one fireplace or appliance, each flue gets its own sweep and its own record. Treating a three-flue house as one chimney is the single most common mistake we’re called in to correct. If a second fireplace or a gas conversion has never been inspected, we’ll flag it before you light it for the season.
Creosote and Soot Removal
We remove soot and creosote by degree, not in a single pass that assumes everything comes off the same way. First- and second-degree deposits brush out cleanly; third-degree glaze is a different problem and gets its own plan. Removing it properly is what makes the fireplace safe to burn again, so we don’t rush the flue to save time.
Chimney Sweep Certified in Montgomery
Chimney Sweep Certified in Montgomery means more than passing a brush through the flue, especially on the larger properties around Woodforest and the ranch land off 77356. A certified Level 1 inspection covers readily accessible parts and appliances; a Level 2 adds a video scan of the flue interior, which is what a multi-fireplace house actually needs. That inspection typically runs $225 – $400 in Montgomery depending on how many appliances are included. When we find a liner that’s failed or a clay flue that’s cracked, we fix it with HeatShield resurfacing or a DuraFlex stainless liner right there in the same visit.
Documented Inspection Results
Every inspection produces a written record with photos of what we found and what condition it’s in. If nothing needs repair, the report says so plainly.
Repair Without a Second Call
When a cap is missing, a crown is spalling, or a damper no longer seals, we correct it while we’re on the property using purpose-engineered Famco and Gelco components. Fewer trips and a chimney that keeps what we fixed.
Trusted Brands We Service in Montgomery
We source from the same professional supply brands working chimney contractors rely on. DuraFlex stainless liner systems are our choice for full relining, and HeatShield’s ceramic resurfacing system handles liner restoration that a temporary patch can’t. Gelco, Famco, and Olympia Chimney products cover caps and weatherproofing, and we name the specific brand on any component we install so you know what’s on your roof. We don’t stock parts on a truck or run a warehouse; the point is that we work with trade-grade materials, not hardware-store substitutes. Turnaround stays quick because the materials that matter most are the ones we order to fit your flue.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Montgomery Homes
- Nested or blocked flues on newer homes. The pine-and-oak canopy north of Houston pushes squirrels, birds, and wasps into uncapped chimneys, so a factory-built fireplace in a young 77316 home can fail inspection before it’s ever been burned.
- Multiple appliances, single inspection. A second fireplace or a gas insert in the den often goes uninspected because the sweep only handled the main chimney. Each appliance needs its own check.
- Third-degree creosote glaze on older 77356 properties. Decades of buildup on ranch and farmhouse flues hardens into a glaze that a standard brush won’t move, and a cracked clay-tile liner needs careful handling.
- Rust and dampers that won’t seal. Montgomery’s humid Gulf Coast summers leave metal fireboxes and dampers sitting exposed; corrosion and warped gaskets are routine finds.
Pricing for Chimney Sweep in Montgomery, TX
Pricing in Montgomery follows the number of appliances and the state of the flue, and we’d rather give you real ranges than a vague answer. A one-flue annual sweep is typically $150 – $275. A property with multiple fireplaces and flues runs $350 – $550. A Level 2 inspection with a video scan is $225 – $400, and relining with HeatShield resurfacing or a DuraFlex stainless system is quoted per flue after the inspection and typically starts in the high hundreds to low thousands depending on length and diameter. A missing cap or crown repair is usually $150 – $450. Estimates are free, and the written estimate sets the final price before any work starts. Call (844) 320-3258 for an exact quote.
We Also Serve Cities Near Montgomery
Our crews cover the towns around Montgomery, so if you’re nearby you’re not out of range. We work in Magnolia, The Woodlands, Porter Heights, and Woodbranch, and the same inspection-first approach applies wherever you are. If you’re close by and want a sweep before the season, Montgomery residents should know we serve these surroundings too. Our chimney sweep team handles each location the same way it handles the properties around here.
Serving Montgomery, TX – Our Local Coverage Area
We serve Montgomery and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Montgomery
Yes, every appliance needs its own annual inspection, even the gas units. Gas inserts and fireplaces have their own venting, clearances, and terminations, and a problem there won’t show up when we inspect the wood flue. We check each one and give you a separate record.
Smoke coming into the room usually means a blocked or undersized flue, a smoke chamber full of construction debris or a nest, or a damper that no longer seals. On newer 77316 homes, nesting and debris from the oak and pine around the house are common even with a cap in place. A Level 2 inspection with a camera finds the cause before we recommend any repair.
It can usually be swept, but a bare clay-tile flue may not be safe to use until it’s relined. We inspect the tile for cracks and gaps first, then quote HeatShield resurfacing or a DuraFlex stainless liner if the masonry won’t hold up. We don’t tell you it needs relining without showing you the evidence.
You can’t reliably tell from the outside, which is why we inspect the flue interior during the sweep. First- and second-degree deposits brush out; third-degree glaze is hard and shiny and won’t come off with a standard brush. Older 77356 flues are the usual place we find it.
On a factory-built or direct-vent unit, the sweep is manufacturer-specific: we verify clearances, check the termination cap and screen, inspect the vent sections for corrosion, and confirm the firebox gaskets are intact. Brushing clay tile doesn’t apply. A young chimney in a new Montgomery home can still fail inspection if a nest or debris cap has blocked it.
Call (844) 320-3258 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Highpoint Chimney Sweep.