Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Aldine, TX
Most chimney work in Aldine isn’t about creosote. It’s about dormant masonry fireplaces in 1960s-1980s single-story ranch and tract homes in 77060, where the firebox sits unused for years in Gulf Coast humidity. That changes what a chimney company should actually do here: inspect first, prove the flue is usable, then clean or repair only what the evidence calls for. Highpoint Chimney Sweep handles chimney inspection, sweeping, and repair under one roof, drawing on professional-tier brands like HeatShield and DuraFlex. Our technicians have up to 12 years of experience. Call (844) 320-3258.
Why Aldine Homes Are Different
Aldine’s housing stock is mid-century to late-20th-century single-story brick-veneer and wood-frame ranch homes, many still carrying their original masonry fireboxes and exterior chimneys. Those chimneys have weathered decades of subtropical Gulf Coast humidity, heavy spring and fall rains, and hurricane-season wind-driven water. What that produces is rarely heavy creosote. It’s failed caps, cracked crowns, and pulled flashing, plus long warm-season dormancy that lets birds’ nests, wasp nests, mold, and rust develop inside flues nobody has looked at in years.
Some older Aldine units have clay-tile flue liners that crack with age and settlement, and a cracked tile is a pathway for moisture and combustion gases in a way a stainless liner isn’t. Locals already know the pattern: these are “cold fireplaces,” lit a handful of nights a year at most, often capped, blocked, or never fired since the builder installed them. That’s why the diagnostic side of the work matters more here than the sweeping side. Treating an Aldine chimney like a working winter hearth in a cold climate gets the priorities backward.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Aldine Services
Aldine homeowners call us about two things more than anything else: getting a dormant fireplace checked before they light it, and fixing the water and animal intrusion that comes with an aging exterior chimney.
Chimney Sweep in Aldine
In Aldine, a sweep is usually a diagnostic visit as much as a cleaning. On a rarely used fireplace, the work leans toward checking the damper, confirming the flue is open and unobstructed, clearing nests or debris, and inspecting the cap and screen for the gaps that let water and animals in. When there is creosote, we remove it, but the honest answer for many 77060 fireplaces is that there’s little to remove and plenty to inspect. Book a Chimney Sweep in Aldine and we’ll tell you which situation you’re in.
Chimney Repair in Aldine
Repair work in Aldine is dominated by water and weather, not fire damage. Cracked crowns, rusted or missing caps, failed flashing where the chimney meets the roof, and spalled mortar from years of Gulf Coast moisture are the recurring jobs. We install purpose-engineered caps and covers from Famco and Gelco rather than improvised hardware, and we reseal crowns and repair flashing so wind-driven rain stops finding a way in. When a clay-tile liner has cracked, we can talk through relining options. Start with Chimney Repair in Aldine.
Chimney Inspection in Aldine
Chimney inspection in Aldine is mostly about proving a dormant fireplace is safe to use, not evaluating a working winter hearth. In a 1960s-1980s single-story ranch home in 77060, the firebox may not have been fired in years, and Houston humidity has had all that time to work on the masonry, the damper, and the flue. A proper Chimney Inspection answers one question before anyone strikes a match: is this flue actually usable?
Fireplace Inspection
Signs you need it
You’re about to light a fireplace you haven’t used in a season or more, or you’ve noticed a musty smell, soot staining, or a damper that won’t move freely.
What it costs in Aldine
A fireplace inspection in Aldine typically runs $99 to $250, with a Level 2 inspection at the higher end when camera work is needed.
How we do it
We examine the firebox, damper, smoke shelf, and accessible flue from the firebox up, then check the exterior cap, crown, and flashing for the water paths that matter most in this climate.
Chimney Flue Inspection
Signs you need it
You’ve seen water in the firebox after heavy rain, noticed nesting material or a strong draft that isn’t normal, or spotted cracked clay tiles from the roof.
What it costs in Aldine
A flue inspection in Aldine is typically $99 to $250, and it’s included as part of the Level 2 inspection when we’re already on site.
How we do it
We run a camera down the flue to look for cracked tiles, gaps at the joints, rust on a prefab liner, and obstruction from nests or debris, then show you the footage.
What Chimney Inspection Costs in Aldine
| Item | Typical range in Aldine |
|---|---|
| Level 1 fireplace inspection | $99 – $175 |
| Level 2 inspection with camera | $150 – $250 |
| Inspection plus sweep | $180 – $340 |
Can a chimney inspection tell me if my Aldine fireplace is safe to use?
Yes. A Level 2 inspection with camera confirms whether the flue is open, unobstructed, and free of cracked tiles or liner damage. You’ll see the footage yourself and get a clear answer before you light it.
Do I need a Level 2 inspection or is a basic check enough?
A basic check is often enough for a fireplace in regular use with no changes to the system. For a dormant Aldine fireplace, a new-to-you home, or any water intrusion, a Level 2 inspection with camera is the right call. Call (844) 320-3258 for an exact quote.
Brands We Service in Aldine
Our repair and relining work draws on professional-tier brands: DuraFlex stainless liner systems, HeatShield ceramic resurfacing for liner restoration, and Famco and Gelco caps and covers. When we name what we install, you can hold us to it. Explore our brands for the full picture.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Aldine, TX
| Service | Typical range in Aldine |
|---|---|
| Level 1 fireplace inspection | $99 – $175 |
| Level 2 inspection with camera | $150 – $250 |
| Inspection plus sweep | $180 – $340 |
| Chimney sweep | $125 – $275 |
| Cap installation | $185 – $450 |
| Crown repair | $275 – $650 |
| Flashing repair | $250 – $600 |
| Masonry repair | $300 – $1,200 |
| HeatShield liner restoration | $1,200 – $2,800 |
| DuraFlex relining | $1,800 – $4,500 |
In Aldine, price is pushed up most by roofline access and by how much masonry repair is needed once we open things up. A cracked crown is a smaller job than a rebuilt one, and a reline costs more than a HeatShield restoration. Either way, the written estimate sets the final price, and the estimate itself is free.
Neighborhoods We Serve in Aldine
We work across the older tract subdivisions and ranch-home blocks that make up much of Aldine, including the 77060 corridor where most of the original masonry fireboxes still stand. One response note covers the whole area: we schedule Aldine visits into our normal dispatch window, Sunday through Friday, 7am to 7pm, and the phones are answered 24/7. A call outside dispatch hours is booked into the next opening.
- Aldine Meadows
- Greensbrook
- Inwood Forest
- Fairgreen
- Hidden Valley
Service Area – Cities Near Aldine
We also inspect and repair chimneys in the communities around Aldine. If you’re just outside the city, one of these pages covers your area: Jersey Village, TX, Humble, TX, Atascocita, TX, and Porter Heights, TX. The Gulf Coast humidity and aging masonry are the same story across the region, so the approach carries over. Call (844) 320-3258 to confirm coverage and book a visit.
Serving Aldine, TX – Our Local Coverage Area
We serve Aldine and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Aldine
Yes. We cover Aldine and the nearby communities listed above, including the older 77060 subdivisions. Call (844) 320-3258 with your address and we’ll confirm the visit and the written estimate.
It depends on the scope. Cap and flashing repairs usually don’t need a permit, while structural masonry or relining may. Ask your city’s building department and your HOA, and we’ll work to whatever the written estimate and any approvals require.
We answer 24/7 and schedule visits in our dispatch window, Sunday through Friday, 7am to 7pm. A call outside that window is booked into the next opening. Most inspections can be scheduled quickly; call (844) 320-3258.
If your Aldine fireplace has sat unused for a season or more, don’t light it until someone has looked at the flue. Call (844) 320-3258 for a free estimate and a written quote before any work begins. We inspect, clean, and repair in one visit, and you’ll see the evidence behind every recommendation.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Aldine Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Renee Schaefer"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Shanice Grant"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Gabriela Herrera