Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across The Woodlands
If your chimney is pulling away from the roofline, staining the brick, or holding water after a storm, we handle the repair without sending you to a second company. Highpoint Chimney Sweep inspects, cleans, and repairs chimneys across The Woodlands, from Grogan’s Mill to Cochran’s Crossing, and we work from trade-grade components: DuraFlex liner systems, HeatShield resurfacing, and Famco caps. Our technicians have up to 12 years of experience reading the kind of damage this town’s tree cover causes. Call (844) 320-3258, and we’ll set up a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Why The Woodlands Homeowners Call Highpoint Chimney Sweep for Chimney Repair
Chimney work in The Woodlands starts with a simple discipline most sweep-only outfits skip: prove the problem before pricing the fix. We run a camera down the flue during a Level 2 inspection and show you the footage. If the tiles are sound, we tell you so and you spend nothing on a liner.
That’s the whole reason homeowners in the older villages call us back. A cracked flue or a porous crown is easy to claim and hard to verify, so we make it visible. You see the inside of your own chimney on screen before anyone recommends relining or rebuilding.
We’re also set up for the full lifecycle. Sweeping, inspection, and structural repair come from one point of contact, so a cleaning that turns up a failing crown doesn’t turn into a hunt for a mason. Trade-grade brands like DuraFlex, HeatShield, Gelco, and Copperfield mean what we install is purpose-built chimney components, not improvised hardware from a big-box aisle.
Response into The Woodlands is straightforward. We book the visit, arrive when we say, and work from a written estimate you approve first. No surprises tacked onto the bill.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Flashing Repair in The Woodlands
Chimney Flashing Repair in The Woodlands usually comes down to the seal where the stack meets the roof, and it’s the first place we look when a homeowner reports a ceiling stain with no obvious cause. Flashing is the metal that sheds water around the chimney base; when the step flashing lifts, the counter-flashing rusts, or the sealant at the joint dries out, rain tracks down the masonry and shows up as a brown ring on the ceiling below. A typical flashing repair here runs $250 – $600, depending on whether we’re redoing the seal or rebuilding the whole flashing assembly.
What the repair involves
We remove the failed sealant, reset or replace the step and counter-flashing, and seal the joint against the roof surface with a material rated for the job. The masonry face gets checked at the same time, since water that’s been running behind flashing often leaves the brick soft right at the seam.
When a Woodlands homeowner needs it
Rust streaks down the chimney, a damp patch on the ceiling near the stack, or flashing visibly pulling away after a heavy rain are all signals to call. Left alone, a flashing leak keeps feeding moisture into the same mortar joints that hold the stack together.
Chimney Crown Repair in The Woodlands
Chimney Crown Repair in The Woodlands matters more than most homeowners realize, because that flat concrete cap on top of the stack is the one thing keeping rain out of the flue. When the crown goes porous or cracks, water sits against the clay tiles and the surrounding brick, and the damage spreads downward. A typical crown repair in The Woodlands runs $300 – $700; a full crown rebuild on a badly deteriorated stack runs $600 – $1,400, depending on size and access.
Sealing versus rebuilding
If the crown is intact but porous, a flexible crown coating can close the surface and shed water again. If it’s cracked through or separating from the flue, we remove and pour a new crown with the proper overhang and drip edge.

Reading the early warning signs
Look for crumbling concrete, a crown that’s pulling back from the flue tiles, or white staining on the brick below. Those are the years of slow moisture damage showing up before the interior of the chimney starts to fail.
Trusted Brands We Service in The Woodlands
We work with professional-tier chimney brands because the components have to last as long as the repair: DuraFlex stainless liners for full relining, HeatShield ceramic resurfacing for restoring a liner that’s still structurally usable, and Famco and Gelco caps and covers for weatherproofing and keeping animals out. We don’t stock parts locally or keep a warehouse. What we do is source from the same professional supply chain contractors and chimney specialists rely on, so the parts arrive purpose-built for the job and we get moving on the repair instead of improvising a fit. It keeps turnaround tight and the finished work correct.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in The Woodlands Homes
- Cracked and spalling clay-tile liners. In exterior masonry chimneys across villages like Panther Creek, years of humidity rather than heavy burning crack the tiles and let moisture reach the surrounding brick.
- Porous or cracked crowns. On 1970s through 1990s stacks, a crown that’s gone soft traps rainwater, which migrates down and degrades the mortar and flashing below it.
- Caps packed with needles and leaf litter. The dense loblolly pine and water oak canopy sheds directly onto chimney caps, blocking draft and letting animals and insects nest in a flue that sits unused for months.
- Rust on prefab metal chimneys. Year-round high humidity attacks metal chimney components on newer factory-built systems, and an unused fireplace gives it plenty of time to work.
Pricing for Chimney Repair in The Woodlands, TX
Repair pricing here reflects the housing stock you’d expect in a master-planned town built from the 1970s onward. Mortar repointing and tuckpointing on an exterior masonry stack typically run $400 – $1,200 depending on how many joints need rebuilding. Spalling brick repair runs $300 – $900. Chimney waterproofing, which seals the masonry against the humidity that drives most of the damage here, runs $250 – $550. A partial rebuild on a badly deteriorated upper stack runs $2,000 – $6,000, and full relining with a stainless system runs $2,500 – $5,500. What moves the number is access, the extent of the deterioration, and whether we’re repointing or rebuilding. You get a written estimate before any work starts, and the estimate is free.
We Also Serve Cities Near The Woodlands
We work across the surrounding area as well as The Woodlands itself, including Magnolia, Porter Heights, Aldine, and Jersey Village. If your chimney is on a home outside the villages, the same inspection-first approach applies. Call (844) 320-3258 and we’ll set up a free estimate, with fast dispatch from 7am to 7pm, Sunday through Friday.
Serving The Woodlands, TX – Our Local Coverage Area
We serve The Woodlands and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in The Woodlands
You know because you see the camera footage yourself. We run a Level 2 inspection with a camera down the flue and show you the cracked or spalling tiles on screen before anyone recommends a liner. If the evidence isn’t there, we say so. That’s the standard we hold to on every repair. Call (844) 320-3258 for an exact quote; estimates are free.
The crown cracks from moisture and temperature swings, not from how often you burn. Here the tree canopy keeps the roof shaded and slow to dry, so a porous crown holds rainwater against the stack year after year. We check the crown on every visit and can reseal or rebuild it. Call (844) 320-3258 to schedule a look.
It’s often both. Packed needles block the draft and let animals and insects nest in a flue that’s unused for months, and the debris holds moisture against the cap and crown. A routine cleaning here often turns into a cap and crown inspection. Call (844) 320-3258 and we’ll check the cap, the crown, and the flue in one visit.
Yes, an inspection still makes sense. A flue can collect debris, nest material, and moisture damage while sitting idle, so an unused year isn’t the same as a clean chimney. We check the flue, cap, crown, and flashing without recommending anything beyond what the camera shows. Call (844) 320-3258 for a free estimate.
Rust means moisture is reaching the metal, usually through a failed cap, a bad crown, or a leak at the flashing. The fix depends on how far the corrosion has gone; some rust can be stopped with proper weatherproofing, while a compromised section needs replacement. We show you what we find on camera first. Call (844) 320-3258 and we’ll assess it.
Chimney repair in The Woodlands comes down to the same thing every time: find the actual problem and fix it, without a second company and without a guess. Whether your stack needs flashing, a new crown, repointing, or a full reline, we inspect, show you the evidence, and price the work in writing. Call (844) 320-3258 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Highpoint Chimney Sweep.